Electronics workbench in your browser
Draw it, run it, build it.
A browser electronics workbench for hobbyists and students: a schematic editor, a virtual bench with real instruments and microcontroller firmware, and PCB layout with open exports. Three flat monthly plans.
No card needed for the trial. Plans from $15/month after that.
Our promises
What you can count on
Flat monthly plans
Basic $15, Pro $29 or Premier $69 a month, each with a set number of Benchmate requests. Optional top-ups are separate when available. Try Basic, plus the starter labs with Pro instruments, for 7 days without a card. The trial ends without a charge.
Your files are yours
KiCad in and out, Gerber, ODB++, pick-and-place and open JSON on every paid plan. Bring your EasyEDA and Eagle projects too.
A virtual bench
Attach instruments to your simulated circuit and run supported firmware. Instrument access depends on your plan.
Honest AI
Each Benchmate request counts once, repairs included. Every AI edit shows what changed, what was kept and what was not checked.
Built for learning
Starter labs today. Classes, assignments and reproducible labs for teachers are coming.
Step 1
Draw it
Place parts from 22,000+ KiCad symbols, wire pin to pin, and let auto-arrange tidy the sheet. Ask the AI to draft or change a circuit when it helps.
Step 2
Run it
Transient, AC, DC sweep and operating-point simulation with Bode plots, plus instruments and microcontroller firmware on the same circuit.
Step 3
Build it
Lay out a two- or four-layer board with push-and-shove routing and design-rule checks, then export to KiCad, Gerber or ODB++.
On the bench
Real instruments on the circuit you drew
Everything in one place
From schematic to board files
- Simulation
- Transient, AC (Bode), DC sweep and operating point via ngspice.
- Instruments
- Basic includes a 2-channel oscilloscope and a multimeter, with up to two bench instruments at once. Pro and Premier add a 4-channel oscilloscope, a logic analyser with I²C/SPI/UART decoding, a signal generator and more, with no instrument limit.
- Firmware
- Run AVR, PIC16 and a supported RP2040 path against your schematic.
- PCB
- Two- or four-layer layout, push-and-shove routing, DRC, copper pours and 3D view.
- Libraries
- 22,000+ KiCad symbols, plus your own symbols and footprints.
- Import
- KiCad PCB, EasyEDA Standard and Eagle schematics.
- Export
- KiCad PCB, Gerber, ODB++, IPC-356, pick-and-place, SPICE netlist, open JSON.
- Reviewable AI
- Draft or edit circuits in chat; every edit lists what changed and what it kept.
- Teamwork
- Share projects, edit together, and replay any saved revision exactly.
Pricing
From $15/month
Basic, Pro and Premier, each with a set number of Benchmate requests (60 a month on Pro), and a repair never costs an extra request. Eligible subscribers can buy optional top-ups when available.
- 7-day trial, no card
- Cancel in one click inside the app
- Exports on every paid plan
- Compare plans →
Choosing a tool?
Honest comparisons, with sources
Each comparison lists where the other tool is better, and every fact links to a dated public source.